To see the size of the system-root and log partitions on an installed system, enter expert mode and run the df -h command. In this example, the system root partition has 25 GB of disk space, and 40 GB is assigned for logs. Most of the remaining space on the disk is reserved for backup images and upgrade. On an Open Server, the available space shown in the Image Management page is less than the space you defined when installing Gaia.
The difference between the two amounts is the space reserved for upgrades. The amount of reserved space equals the size of the system-root partition. To install the latest version of R77 on appliances running R On appliances running R See sk The appliance begins the boot process and status messages show in the terminal emulation window.
Note - If more time elapses, the appliance boots from the hard drive. The R77 ISO file is installed on the appliance, and the version and build number show in the terminal emulation window and on the LCD screen. Gaia Quick Setup is suitable for quick deployment of preconfigured settings on Check Point appliances. You can use it in production environments, for Security Checkup analysis, and for demos. For more information, see sk To configure Check Point products on an appliance running Gaia Operating System, the administrator uses the IP address of the management interface on the appliance.
The default is If you change the management interface IP address, make sure it is on the same subnet as the management network, so that you can access the appliance from a remote computer over the network.
In order to maintain the browser connection, the old IP address will be retained as a secondary IP address. Now, you can use the configured management IP address to connect through a browser with the Portal and to run the First Time Configuration Wizard.
Note - The connection will drop, because the settings of an interface the browser is currently connecting to are changed. Note - You can leave the IP address and the subnet mask unchanged. It is either the factory default address or the latest address that the administrator configured.
After Gaia R When you configure a Standalone appliance in Quick Setup mode, these products settings are configured:. If you want to convert the standalone appliance into a gateway only, and manage it with an existing Security Management Server, you can download and run this script on the appliance:.
A standalone deployment can be installed on any computer that meets the minimum requirements see the Release Notes. This procedure explains how to install the Gaia operating system on an open server.
Then you configure the Standalone Check Point products. Configure the operating system and install the products in one wizard. If you change the management IP address, the new IP address is assigned to the interface. The old IP address is added as an alias and is used to maintain connectivity. If there is a proxy server between the appliance and the Internet, enter its IP address and port. After some minutes, you can use the Portal to configure your standalone environment.
Use the same procedure as for the primary Security Management Server, with these changes:. Permanent Kernel Global Variables. Installing Security Management Server on Appliances. You can install a Security Management Server on Smart-1 appliances. For more about supported appliances, see the Release Notes. The Security Management Server image is selected for the appliance and then the appliance resets.
This is useful if you must access the device over the network. Use the console connection to configure the management interface before connecting the Gaia appliance to the network. Once the management interface has this address, you can connect through a browser over the network and run the First Time Configuration Wizard. Note - This changes the settings of an interface the browser is currently connecting to.
The management interface is preconfigured with the IP address If you later change it through the Check Point Portal, make sure that the new address is on the same subnet as the management network. The First Time Configuration Wizard runs.
In the Deployment Options page, select Continue with Gaia configuration. Other options are:. You can change the Management IP address. Gaia automatically creates a secondary interface to keep connectivity when the management interface is not available. For R Check Point highly recommends that you select Automatic Downloads. A Security Management Server can be installed on any computer that meets the minimum requirements listed in the Release Notes.
First install and configure the operating system, then install Check Point products. This procedure explains how to install a Security Management Server in a distributed deployment after you install the operating system. You can install a log server for a distributed deployment. Install the operating system and start to install the products as for a Security Management Server, but stop at the step where you select components. Use the installation instructions in this guide to install Security Management Servers.
Endpoint Security E For R77 and R These updates are mandatory for the correct functioning of the Anti-Malware Software Blade. Preventing them causes severe security issues, because the blade does not operate with the latest malware information database. These updates are mandatory for the correct functioning of the Endpoint Application Control Software Blade.
Without these updates, the blade is unable to classify malicious applications and automatically distinguish between them and non-malicious ones. If you disable the blade, the port changes back to We recommend that you have at least 10 GB available for Endpoint Security in the Root disk partition. Note - To make future upgrades easier, we recommend that you use a larger disk size than necessary in this deployment.
Installing Security Gateways on Appliances. Configuring Security Gateways on Gaia. The appliance operating system can be Gaia or SecurePlatform. Note - Make sure that the management interface on the computer is on the same network subnet as the appliance. For example: IP address The Summary window shows the settings for the appliance.
This is a clean installation. See: sk In the First Time Configuration Wizard:. This procedure explains how to install a Security Gateway in a distributed deployment after you install the operating system. You can also install it on any computer that meets the minimum requirements see the Release Notes. Install and configure the Gaia operating system for a Security Gateway.
In the Products window, make sure to only select Security Gateway. To find out the: Amount of un-partitioned free disk space run: pvs Size of the root partition, run: df -h To update the Gaia Software Updates agent: Make sure the proxy and the DNS server are configured. In the Software Deployment Policy section. Periodically update new Deployment Agent version - Updates only the DA according to the configured time period.
Click Apply. Select the R77 image. Click Download. Click OK. Click Clean Install. When installing Gaia on an open server, these partitions have default sizes: System-swap System-root Logs Backup and upgrade You can change the System-root and the Logs partition sizes.
Create one of these removable installation media: DVD - burn the ISO file onto it Removable USB device - see sk to create it Connect a computer to the console port on the front of the appliance through the supplied DB9 serial cable.
Connect to the appliance through a terminal emulation program, using these connection settings: The connection type - select or enter a serial port Define the serial port settings: BPS, 8 bits, no parity, 1 stop bit. From the Flow control list, select None. Connect the installation media to the USB port on the appliance. Reboot the appliance. Redirect boot sequence to the installation media: For installation from a DVD - Press Enter within 90 seconds to boot from the installation media.
For installation from a removable USB device - In the boot screen, enter serial at the boot prompt and press Enter. The appliance reboots and shows the model number on the LCD screen. Configuring a Standalone Appliance You can configure a Check Point Standalone appliance using the Check Point First Time Configuration Wizard in one of these modes: Standard - supported on all appliances running all R77 Gaia versions Quick Setup - supported only on , , , and series appliances running R To change the management IP address before running the First Time Configuration Wizard: Open a console connection to the appliance using the default management IP address.
Log in using the default credentials: username - admin password - admin Run the show interfaces command to get the name of the management interface. The Management interface window shows which interface is configured as the management interface.
In Interfaces table, select the management interface and click Edit. Change the IP address of the interface. On a computer that is connected to the management network, open a web browser to the management IP address on the appliance.
The login page opens. Log in with the default credentials: username - admin password - admin Click Login.
Click Next. Change the default administrator password and click Next. Configure the Management Connection settings: IPv4 address and Subnet mask of the management interface Note - You can leave the IP address and the subnet mask unchanged. As a Bit OS, Gaia increases the connection capacity of existing appliances supporting up-to 10M concurrent connections for select Models.
Gaia simplifies management with segregation of duties by enabling role-based administrative access. Furthermore, Gaia greatly increases operation efficiency by offering Automatic Software Update. The feature-rich Web interface allows for search of any command or property in a second. At boot choose the install on disk options. You need to open quickly the terminal after launching the appliance if you want to see the menu.
You need a web browser in order to finalize the installation.
0コメント